Product Categories
- Fence Mesh
- 358 mesh panel fence
- Temporary Fence
- Workshop Fence
- Wave Fence
- Frame Fence
- Welded Wire Mesh
- Welded Wire Mesh
- Holland Wire Mesh
- Holland Wire Mesh
- PE Powder
- Polyethylene Powder
- Marine quality mesh
- Lobster Traps
- lobster trap wire
- Crab trap wire
- Hexagonal netting
- Hexagonal Netting - GBW
- Hexagonal Netting - GAW
- Hexagonal Netting - VC
- PVC Glued Wire
- PVC Glued wire
- Gabion Mesh
- Welded Gabion
- Gabions
- Steel Grating
- Steel Grating
- Quarry Screen Mesh
- Quarry Screen Mesh
- Bailing Wire
- Single Loop Bale Ties
- Double loop bale ties(quick link) Auto-Tie Baling Wire
- Double loop tie wire
- Invisible cover plate
- Decorative manhole cover
- Invisible cover plate
Location>>Home>>News>>Holland Wire Mesh installation methodNews content
Holland Wire Mesh installation method
Data:2023/5/6 16:17:03
Holland Wire Mesh installation method:
Due to the installation of the Holland Wire Mesh, the columns need to be pre embedded. Therefore, it is necessary to dig a 30-50 cm pit in advance, and dig one every 3 meters, as the columns are made every 3 meters. According to the terrain, the Gewen site column can be selected.
After digging the pit, fasten the column cap on the column, place it in the pit, and fix it with cement. It will take about 48 hours to fix it.
Once the column is fixed, you can install the Holland Wire Mesh. Secure the Holland Wire Mesh with the column using a buckle, with one at approximately 30 centimeters of the buckle.
Just like this, all the installation is done!
Last:Welded wire mesh is mainly used in construction engineering
Next:None
Next:None